Download  Print this page

Carburetor Installation - Kawasaki ZR-7S Service Manual

Hide thumbs

Advertisement

2-14 FUEL SYSTEM
Carburetors
.
Remove the carburetors assembly to the light side of the
frame.
. Remove the throttle cable ends [A].
.
Stuff pieces of lint-free, clean cloth into the carburetor
holders to keep dirt out of the engine.
A
WARNING
If dirt or dust is allowed to pass through into the
carburetor, the throttle may become stuck, possibly
causing an accident.
CAUTION
If dirt gets through into the engine, excessive en-
gine wear and possibly engine damage will occur.
Carburetor
Installation
.
Be sure to install the throttle cable ends before install the
carburetors
.
Route the cables, harness, and hoses correctly (see Gen-
erallnformation chapter).
.
Tighten the clamps for the carburetor holders at the posi-
tion in the figure.
Upper Side [A]
.A.WARNING
Be sure to install the holder clamp screws in the di-
rection shown. Or, the screws could come in con-
tact with the throttle linkage resulting in unsafe rid-
ing condition.
.
Check fuel leakagefrom the carburetors.
~
!
Fuel spilled from the carburetors is hazardous.
.
Adjust the following items if necessary.
Idle Speed
Carburetor Synchronization
Throttle Cables
Choke Cable

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: