Download  Print this page

Diode Circuit Inspection - Kawasaki ZR-7S Service Manual

Hide thumbs

Advertisement

Junction Box
Diode Circuit Inspection
• Remove the junction box .
• Check the continuity between the following terminals, in
both directions:
Diode Circuit Inspection
ELECTRICAL SYSTEM 14-71
Tester Connection
13 - 8,13 - 9,12·11,12·14,
15-14,16-14
If the measurement is low in one direction (forward direc-
tion), but 10 or more times higher in the reverse direction
(with practically no movement of the needle), the diode is
normal. The diode is defective if there is continuity after
changing the direction, or if
it
remains with no continuity. In
this case, replace the junction box.
NOTE
o
The actual meter reading varies with the meter used
and the individual diodes, but generally speaking, the
diode is good
if
the tester's needle sings about 1/2 the
scale.

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: