Download  Print this page

Commutator Cleaning/inspection - Kawasaki ZR-7S Service Manual

Hide thumbs

Advertisement

Electric Starter System
elnstall the washers [AJ,
• Install the armature [B] between the brushes.
elnstall the yoke [A] onto the left end cover (B] aligning the
marKs
[CJ
on the yoke and left end cover.
• Install the washers (A).
elnstall the plate [B) into the yoke until it is stopped.
elnstall the right end cover so that the projection [A] fits into
the notch [B] on the internal gear.
• Tighten:
Torque· Starter Motor Through Bolts: 6.9 N·m (0.70 kgf·m,
61 in-Ib)
Commutator Cleaning/Inspection
• Smooth the commutator surface [A)
if
necessary with fine
emery cloth (B], and clean out the grooves.
ELECTRICAL SYSTEM 14-43
A

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: