Download  Print this page

Spark Plug Cleaning, Inspection; Spark Plug Gap Inspection; Ic Igniter Removal - Kawasaki ZR-7S Service Manual

Hide thumbs

Advertisement

Ignition System
Spark Plug Cleaning, Inspection
• Remove the spark plugs and visually inspect them.
*
If the spark plugs have any carbon deposits on them, use
a spark plug cleaner or a wire brush to remove them.
*
If the spark plugs are contaminated with oil, wash them in
cleaning solvent.
*If the spark plug's center electrode is corroded or burned,
or if the insulator is broken, replace the spark plug.
Spark Plug Gap Inspection
• Using a wire type spark plug gap gauge, measure the
spark plug gap [Aj.
*
If the gap is incorrect, carefully bend the side electrode
[B] with
a
suitable tool to obtain the correct gap.
Spark Plug Gap
Standard:
0.6 - 0.7 mm (0.024 -0.028 in.)
IC Igniter Removal
CAUTION
Do not disconnect the
Ie
igniter or other electrical
connections when the ignition switch is ON or the
engine is running, as this could damage the igniter.
• Remove the seat (see Frame chapter).
• Remove the IC igniter [A] from the bracket, and discon-
nect the connector.
• Remove the IC Igniter.
Ie Igniter Inspection
• Remove the seat (see Frame chapter).
• Disconnect the connector [8] from the igniter [A).
• Remove the igniter.
ELECTRICAL SYSTEM 14-35

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: