Download  Print this page

Advertisement

12-10 STEERING
Handlebar
.
The front half of the right and left switch housings [A] has a
small protrusion [B]. Engage this protrusion with the hole
[C] in the handlebar.
.
Install the handlebar switch housings.
Torque
-
Handlebar Switch Housing Screws: 3.4 N.m (0.35
kgf.m, 30 in.lb)
.
Align the punch mark [A] on the handlebar with the mating
surtace [B] between the clutch lever holder [B] and the
clamp.
.Install the front master cylinder (see Brake chapter).
.Install the throttle and left grip.

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: