Download  Print this page

Brake Lever, Brake Pedal; Brake Lever Position Adjustment; Brake Pedal Position Inspection; Brake Pedal Position Adjustment - Kawasaki ZR-7S Service Manual

Hide thumbs

Advertisement

Brake Lever, Brake Pedal
BRAKES 10-5
Brake Lever
Position
Adjustment
The brake lever is adjustable to four positions to suit the
rider.
.
Push the lever forward and turn the adjuster [A] to align
the number with the arrow mark [B].
OThe distance from the grip to the lever is maximum at
Number 1 and minimum
at Number 4, or Number 5
(ZR750-H4 - ).
Brake Pedal
Position
Inspection
.Inspect the position [A] of the brake pedal.
* Adjust the position if it is out of standard.
Brake Pedal Position
Standard:
40 mm (1.6 in.)
Brake Pedal Position Adjustment
NOTE
o
Visuallyit is not necessary to adjust the pedal position,
but always adjust it when the push rod locknut has been
loosened.
.
Loosen
the adjuster locknut [A] at the bottom of the mas-
ter cylinder, which is behind the right step bracket.
.
Turn the push rod with the hex head [B] to achieve the
correct pedal position (see Brake Pedal Position Inspec-
tion).
.
Tighten the adjuster locknut.
Torque
-
Brake Pedal Adjuster Locknut:
18 N.m (1.8 kgf.m,
13 ft.lb)
.Inspect
the engagement timing of the brake light switch
(see Electrical System chapter).
Brake
Pedal
Removal
. Remove:
Rear Master Cylinder Mounting Bolts [B]
Right Step Bracket Bolts [A]

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: