Download  Print this page

Advertisement

9-10 FINAL DRIVE
Drive Chain
.
After staking, check the staked area of the link pin for
cracks.
. Measure the outside diameter [A] of the link pin and link
plates width [8].
Link Pin Outside Diameter
Standard:
5.60- 6.00 mm (0.220- 0.236 in.)
A
Link Plates Outside Width
Standard:
19.85- 20.00 mm (0.703- 0.787 in.)
*
If the reading exceeds the specified length, cut and rejoin
the chain again.
.
Check:
Movement of the Rollers
.
Adjust the drive chain slack after installing the chain (see
Drive Chain Slack Adjustment).
@
GK04028BS 1 C

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: