Download  Print this page

Advertisement

Drive Chain
FINAL DRIVE
9-9
.
Fit the plate holder (A) to the link plate.
. Turn the pin holder by hand until the plate holder (8)
touches the other linkplate.
.Turn the pin holder by wrench clockwise untiltwo pins of
the linkcome into the groove of the plate holder (A).
.
Take off the plate holder.
. Set the plate holder (8) [A]and cutting & riveting pin [8]
as shown.
.
Turn the pin holder until the riveting pin touches the link
pin.
.
Turn the wrench clockwise untilthe tip of the riveting pin
hits of the link pin.
.
Rivet it.
.
Some workforthe other linkpin.
GK04023BS1
C
GK04026BS1
C

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: