Download  Print this page

Valves; Valve Clearance Inspection - Kawasaki ZR-7S Service Manual

Hide thumbs

Advertisement

3-22
ENGINE
TOP END
Valves
Valve Clearance Inspection
NOTE
o
valve clearance must be checked and adjusted when
the engine is cold.
.
Remove:
Cylinder Head Cover (see Electrical System chapter)
Crankshaft Sensor Cover (see Cylinder Head Cover Re-
moval)
.
Using a thickness gauge, measure the clearances be-
tween each cam and valve lifter.
Valve
Clearance
Standard:
0.08
-
0.18 mm (0.0031 - 0.0071 in.)
OTurn the timing rotor in the positive direction, and align
the TOC mark [A] of the #1 and #4 pistons with the timing
mark [8] on the crankcase.
NOTE
o
Bring the #4 piston to the TOGof its compression stroke
to inspect the clearance of the intake valves of the #2
[A]and #4 [B]cylinders, and the exhaust valves of the
#3 [G]and #4 [0] cylinders. Forthe purpose of adjusting
the valve clearances, record the measured values.
NOTE
OBring the #1 piston to the TOGof its compression stroke
to inspect the clearance of the intake valves of the #1
[A]and #3 [B]cylinders, and the exhaust valves of the
#1 [G]and #2 [0] cylinders. Forthe purpose of adjusting
the valve clearances,recordthe measured
values.
*
If any measurement is out of standard, adjust the valve
clearance.
GE150434S1
C
GE150435S1
C

Advertisement

Table of Contents

   Also See for Kawasaki ZR-7S

Comments to this Manuals

Symbols: 0
Latest comments: