16-78 ELECTRICAL SYSTEM
Check that the display changes to the unit setting mode
By turning the meter unit switch [A] to MODE-B position
[B] each time, check that the display changes as follows.
If the display function does not work, replace the meter
base (see Meter Unit Disassembly).
To return to the ordinary indication, push and hold the
meter unit switch more than two seconds.
Can Communication Item Inspection
Cruise Control Indicator Light (LED) Inspection
Turn the ignition switch to ON.
Push the cruise control ON/OFF button [A].
Check that the cruise control indicator light (LED) [A] goes
Push the cruise control ON/OFF button.
Check that the cruise control indicator light (LED) goes
If the cruise control indicator light (LED) does not function,
check the right handlebar switch housing (see Switch In-
If the switch housing is good, replace the meter base
The cruise control indicator light (LED) goes on at the
check of the cruise control cancel switches too (see
Cruise Control Cancel Switches Inspection).