K-ACT ABS (Equipped Models)
Pre-Diagnosis Inspection 2
Self-diagnosis Outline
When the indicator light has blinked or come on, the K-ACT ABS hydraulic unit memorizes and
stores the service code (32 codes including "Normal Code") for the service person to troubleshoot
easily. The service code memory is powered directly by the battery and cannot be canceled by the
ignition switch.
The K-ACT ABS hydraulic unit can memorize up to six service codes. Further service codes are
memorized after erasing the preceding six service codes. If there is no fault, only the start code 12 is
shown, indicating that "The K-ACT ABS is normal".
Self-diagnosis Procedures
○
When a problem occurs with the K-ACT ABS, the K-ACT
ABS indicator light (LED) [A] lights.
○
Use a fully charged battery when conducting
self-diagnosis. Otherwise, the light blinks very slowly
or doesn't blink.
○
The motorcycle is stopped.
○
Keep the self-diagnosis terminal grounded during self
-diagnosis, with an auxiliary lead.
NOTE
BRAKES 12-41
Comments to this Manuals
Latest comments: