9-14 CRANKSHAFT/TRANSMISSION
Crankcase
○
Be sure to tighten the right crankcase bolts first.
•
Tighten the right crankcase bolts using the following
steps.
○
First, tighten the M10 bolts (3) [A].
Torque - Crankcase Bolts (M10) : 39 N·m (4.0 kgf·m, 29 ft·lb)
○
Next, tighten the M6 bolts (9) [B].
Torque - Crankcase Bolts (M6) : 12 N·m (1.2 kgf·m,
106 in·lb)
•
Tighten the left crankcase bolts (11) [A].
Torque - Crankcase Bolts (M6) : 12 N·m (1.2 kgf·m,
106 in·lb)
•
After tightening all crankcase bolts, check the following
items.
○
Wipe up the liquid gasket that seeps out around the
crankcase mating surface.
○
Crankshaft, transmission shafts and balancer shafts turn
freely.
○
While spinning the output shaft, gears shift smoothly from
the 1st to 6th gear, and 6th to 1st.
○
When the output shaft stays still, the gear cannot be
shifted to 2nd gear or other higher gear positions.
NOTE
Comments to this Manuals
Latest comments: