Self-Diagnosis
•
Turn the ignition switch ON.
•
The service code [A] is displayed by the number of two
digits.
•
When pushing the "S" button [B] of the right handlebar
switch housing for more than two seconds while the "Er-
ror" segments [C], service code and FI warning symbol
[D] are displayed on the LCD, the display on the LCD is
switched to the normal display. But, the warning indicator
light (LED) [E] goes on or blinks and the FI warning sym-
bol is displayed.
•
After switching to the normal display, the service code can
be displayed again by the following procedures.
○
Push the "S" button of the right handlebar switch housing
for more than two seconds to display the clock setting
mode [A] on the LCD.
○
Push the "S" button to display the service code [B].
○
The display change to the clock setting mode, average
fuel consumption unit setting mode [C], service code
display each time the "S" button is pressed.
•
Any of the following procedures ends self-diagnosis.
○
Push the "S" button for more than two seconds.
○
When the ignition switch is turned OFF.
NOTE
FUEL SYSTEM (DFI) 3-35
Comments to this Manuals
Latest comments: