Tips About Indicator Panel - Sharp AY-XPM7FR Operation Manual

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according
to the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
0
26 Heat
Heat
(24°C) (23°C)
Indoor temp.
(°C)
• During operation, if the outdoor temperature changes, the temperature settings will auto-
matically slide as shown in the chart.
• Mode of the unit operated fi rst will have priority over unit(s) without reference to the chart.

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you press
the DISPLAY button in the following manner.
Room temp. Lamp
Temperature
Indicator
The room temperature is
displayed.
NOTES:
• The displayed temperatures are rough estimates and may vary from the actual tempera-
tures.
• Temperature display ranges
Room temperature: 0°C ~ 40°C (
than 40°C)
Outdoor temperature: –9°C ~ 45°C (
higher than 45°C)
• is displayed during the fi rst about 120 seconds of operation while the temperatures are
being detected.
• is displayed for 5 seconds when the unit is not in operation.
• During SELF CLEAN operation, the indicator panel will display remaining time of the opera-
tion. Room and outdoor temperature will not be displayed even if you press the DISPLAY
button.
10 18 28
Cool
(24°C)
Heat
Dry
(22°C) (Room temp. -2 °C)
the fi gures in ( ) are temperature settings
Outdoor temp. Lamp
The outdoor temperature
is displayed.
is displayed when less than 0°C and
is displayed when less than –9°C and
GB-9
Outdoor
temp.
(°C)
34
Cool Cool
(25°C) (26°C)
Temperature
Indicator
DISPLAY
No display.
when higher
when