Download Print this page

Auxiliary Mode; Maintenance - Sharp AY-XP18GR Operation Manual

Hide thumbs

Advertisement

Table of Contents

AUXILIARY MODE

AUXILIARY MODE
Use this mode when the remote control is not available.
TO TURN ON
Lift the open panel of the indoor unit and press the AUX.
button on the operation panel.
• The red OPERATION lamp (
unit will start operating in the AUTO mode.
• The fan speed and temperature setting are set to AUTO.
TO TURN OFF
Press the AUX. button on the operation panel again.
• The red OPERATION lamp (
NOTE:
If the AUX. button is pressed during normal operation, the unit will turn off.

MAINTENANCE

Be sure to disconnect the power cord from the wall outlet or turn off the circuit
breaker before performing any maintenance.
CLEANING THE FILTERS
1
2
3
2
1
) on the unit will light and the
) on the unit will turn off.
The air filters should be cleaned every two weeks.
1
2
3
3
4
5
6
E-16
TURN OFF THE UNIT
REMOVE THE FILTERS
1 Lift the open panel.
2 Push the air filters up slightly to unlock them.
3 Pull the air filters down to remove them.
TAKE OFF THE AIR PURIFYING
FILTERS FROM THE AIR FILTERS
CLEAN THE FILTERS
Use a vacuum cleaner to remove dust. If the
filters are dirty, wash them with warm water
and a mild detergent. Dry filters in the shade
before reinstalling.
REINSTALL THE AIR PURIFYING
FILTERS
REINSTALL THE FILTERS
1 Reinstall the filters in the original positions.
2 Close the front panel.
3 Push the arrow-marked of the panel firmly
to lock it in place.

Advertisement

Table of Contents
loading

  Also See for Sharp AY-XP18GR

  Related Manuals for Sharp AY-XP18GR

This manual is also suitable for:

Ay-xpm18hrAy-xp24gr