Front Panel Facilities; Organes Du Panneau Avant - Pioneer CT-IS21 Operating Instructions Manual

Hide thumbs Also See for CT-IS21:
Table of Contents

Advertisement

Front Panel Facilities

1 STANDBY/ON button and standby
indicator
This is the power switch.
ON
: When set to the ON position, power is sup-
plied and the unit becomes operational.
STANDBY : When set to the STANDBY position, the
main power flow is cut and the unit is no
longer fully operational. A minute flow of
power feeds the unit to maintain operation
readiness.
Energy-Saving Design
This product has been designed to reduce energy
consumption when the unit is in the power off
(standby) mode.
¶ Consult the Specifications (P. 54) for the power
consumption in standby mode.
NOTE:
When the Stereo Cassette Deck CT-IS21 is connected to
the XC-IS21MD or XC-IS21T via the system cable, the
unit's power will be switched on/off (standby) automati-
cally by operating the STANDBY/ON button of either of
the connected units.
2 Recording-pause button (¶ 8)
3 REC (recording) indicator
4 ASES button
5 Play indicator
6 Play buttons and direction indicators (2, 3)
7 Reverse mode indicators
8 Fast forward/reverse buttons(1, ¡)
9 Cassette tray
0 OPEN/CLOSE button (0)
- STOP button(7)
= DOLBY* NR button and indicator
*
¶ Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
¶ "DOLBY" and the double-D symbol are trademarks
of Dolby Laboratories Licensing Corporation.
~ REVERSE MODE button
10
En/Fr
Organes du panneau
avant
1 Touche et voyant d'attente/mise sous
tension (STANDBY/ON)
Cette touche commande l'alimentation électrique:
ON
: A la position ON, le courant électrique est
fourni et l'appareil peut fonctionner.
STANDBY : A la position STANDBY, l'alimentation
électrique est coupée et l'appareil n'est plus
opérationnel. Cependant, un faible courant
continue de passer pour le maintenir prêt à
fonctionner.
Conception économique
Cet appareil est conçu de manière à réduire la
consommation d'énergie lorsqu'il est placé hors ten-
sion (en mode d'attente).
¶ Reportez-vous à la Fiche technique (P. 54) en ce
qui concerne la consommation de courant en
mode d'attente.
REMARQUE:
Lorsque la Platine cassette stéréo CT-IS21 est raccordée
au XC-IS21MD ou au XC-IS21T par le câble de système,
sa mise sous/hors tension (attente) sera commandée
automatiquement par la touche STANDBY/ON de l'un
ou l'autre des appareils raccordés.
2 Touche d'enregistrement-pause (¶ 8)
3 Voyant d'enregistrement (REC)
4 Touche de fonction ASES
5 Voyant de lecture
6 Touches de lecture et voyants de direc-
tion (2, 3)
7 Voyants de mode d'inversion
8 Touches d'avance rapide/recul rapide
(1, ¡)
9 Plateau de cassette
0 Touche d'ouverture/fermeture (OPEN/
CLOSE 0)
- Touche d'arrêt (STOP 7)
[suite page 12]

Advertisement

Table of Contents
loading

Table of Contents