Page 352 of 544
Call timers
Date and time-of-day clock
Data transmission
553-3011-100
Standard 14.00
M5317 BRI Terminal
NI-1 and Meridian 1 modes only. Call timers are provided as follows:
•
There is one timer for each call appearance, including non-directory
number (DN) call appearances.
•
Timers run when associated call appearances are connected or held.
•
Timers may be manually reset by the user.
•
Timers start automatically after 10 seconds if a call-connect message is
not received (non-ISDN or off-net calls).
•
Timers start (or reset) when the called number answers.
NI-1 and Meridian 1 modes only. This feature displays the time in 12-hour
format. If power fails, the date and time must be reset.
The M5317T telephones support PCM voice on either B-channel. Circuit-
switched data calls on the M5317TDX may be made using the other B-
channel. The NT T-link or standard V.120 protocols are used to convert the
serial data from the RS-232C port to the 64 Kbit/sec stream (rate adaption)
for transmission on the B-channel.
The M5317TDX Data Option is logically separate from voice calls. The
Hayes protocol is used to control circuit-switched data calls, and X.25 packet-
switched calls on D-channel are supported with X.3, X.28, X.29 control
protocol.
January 2002