Related Manuals for Nortel Station Port Adapter DS30
Summary of Contents for Nortel Station Port Adapter DS30
-
Page 1: Installation Guide
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • DS30/Station Port Adapter Installation Guide • • • • • • • • • • • • • • • • • • •... -
Page 2: Regulatory Approval
DS30/STATION PORT ADAPTER REGULATORY APPROVAL Table 1. Regulatory Approvals TYPE COUNTRY Radiated Canada Emissions US Conducted Canada Emissions United States FCC Part 15/CISPR22 Class B ANSI C63.4 Safety Canada International This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. -
Page 3: Product Description
PRODUCT DESCRIPTION Table 2. Product Description CONNECTOR RJ-45 Jacks INTERFACES DS-30 Fiber Connector Power Connector SIZE Approx. 9.75” (248 mm) x 5.06” (129 mm) x 1.22” (36mm) WEIGHT Estimated 20 ounces (567 grams) includes bezel and PCB but not wall-mounted power supply POWER Country North America... -
Page 4: Installation
INSTALLATION 1. Connect the TCM Loops from the KSU to a male RJ-45 connector using the wiring scheme in Figure 2 below. Connect up to 8 TCM Loops with TCM Loops 1 to 4 in RJ-45 connector 1 and TCM Loops 5 to 8 in RJ-45 connector 2. -
Page 5: Troubleshooting
TROUBLESHOOTING Table 3. Troubleshooting Guide SITUATION Fiber Line LED light is flashing Fiber Line LED light is off Fiber Line LED light is on TCM Loop LED port light is on TCM Loop LED port light is off NOTE: Timing master uses highest numbered TCM Loop connected port to synchronize DS-30 link. - Page 6 Norstar is a trademark of Northern Telecom. P0878745 Issue 01 Printed in the United States • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •...