Using The Zoom - Nikon Coolpix S4000 User Manual

Using the Zoom

Use the zoom control to activate optical zoom. Rotate
the zoom control to g to zoom in so that the subject
fills a larger area of the frame, or f to zoom out, thus
increasing the area visible in the frame.
A zoom indicator is displayed at the top of the monitor
when the zoom control is rotated.
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating
and holding the zoom control at g triggers digital zoom. The subject is magnified
up to 4× the maximum optical zoom ratio.
The camera focuses at the center of the frame and the focus area is not displayed
when digital zoom is in effect.
C
Digital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality according to the image mode (A 48) and
digital zoom magnification.
Interpolation is applied at zoom positions beyond V when taking still pictures. When zoom is
increased beyond the V position, interpolation is initiated and the zoom indicator turns yellow to
indicate that interpolation is being applied. The position of V moves to the right as image size
decreases, allowing for confirmation of the zoom positions at which shooting without interpolation
is possible at the current image mode setting.
Digital zoom can be disabled from the Digital zoom option (A 148) in the setup menu (A 138).
Maximum
optical zoom
Small image size
Step 2 Frame a Picture
Zoom out Zoom in
Optical
zoom
Digital zoom
enabled
Digital
zoom
29