Selecting A Zone - Motorola EMS APX 6000 User Manual

Selecting a Zone

A zone is a group of channels.
Use the following procedure to select a zone.
Note: Your radio must be preprogrammed to allow you to use
this feature.
English
3-Position
A/B/C Switch
11/2/15
OR
Follow the procedure below.
1 < >
or to Zone.
2
Press the Menu Select button directly below Zone.
3 U D
or to the required zone.
4
Press the Menu Select button directly below Sel to confirm
the displayed zone.
5
Press the PTT button to transmit on the displayed zone
channel.
OR
Follow the procedure below.
1 < >
or to ZnUp or ZnDn.
2
Press and hold the Menu Select button directly below ZnUp
or ZnDn until the required zone appears.
Note: Positions of ZnUp and ZnDn on the display may differ
each time you release the Menu Select button. Read
carefully before you press.
25