How To Part Set The System - Honeywell ADE ACCENTA Gen4 User Manual

How
to
Part Set
User Guide
How to Part Set the System
If your installer has programmed your system for part set operation you can set certain zones of the
system while others remain unset. Part set operation is often used at night time, and it permits you to
freely walk around the bedrooms while the living area and outside doors are protected. Your system
may have 2 part-set programs called Program 2 and Program 3.
Before part-setting the system you should ensure that all doors and windows are closed. Ensure that
pets do not have access to the protected areas. Your installer may have instructed you to use a different
keypad to the one normally used to set the system.
LCD Keypad:
The
ill
LED should be on. The screen shows the date and time:
Enter your code [0][1][2][3]. The exit beep starts.
Press CD . The exit tone stops.
Select part-set program [2) or [3]. The system set after a
short time. The
ill
LED goes out.
NOTE: There are no exit beeps if Silent Timed exit mode
has been programmed.
I Program 1 Set "1
or 3
SYSTEM SET
**
5