How To Set Up The Time And Date - Honeywell ADE ACCENTA Gen4 User Manual

!
How to Set Up tbe Time
&
Date
J
User Guide
How to Set up the Time and Date
LCD Keypad:
Press CD and then enter your code [0][1][2][3]. The
Iil
LED goes off, indicating that you are in Programming
mode.
The first menu Walk Test appears on the screen.
Press [4] and the Time and Date Screen appears.
The Time can be modified
in
hours, minutes and seconds
in
the format HH:MM:SS. The number keys on the
keypad 0-9 are used for this function. As each digit is
modified the cursor moves to the next one. When the time
is correct press
Q)
to accept the change and move to the
next screen or to cancel the change press
®
twice.
The Date can be changed
in
day, month, year format
DD-MM-YY. The number keys on the keypad 0-9 are used
for this function.
As each digit is modified the cursor moves to the next one.
When the date is correct press Q) to accept the change or to
cancel the change press
®
twice.
LED Keypad:
CD then [0][1)[2)[3]
I
lo>walk Test
I
[4]
Time and Date
Time?
13:46:17
I
Q)
Time and Date
Date?
17-05-06
Q)
I
14>set
Up
'rime and Date
If required, the time and date can be entered as per the procedure for the LCD keypad. However no
information will be indicated on the LED keypad. The only indication on the LED keypad that you are
in menu 4, Set up Time and Date, is that LEDs
1
to 6 on the LED Keypad will be ON.
19