YA-G30_3D Glasses_e.book 11 ページ ２０１１年３月１４日 月曜日 午後４時５３分
Loading the Batteries
To avoid damage to the battery cover, carefully follow the steps of the procedure below.
Remove the battery cover screw.
Hook your fingernail into the groove
. While gently lifting up on
the battery cover, slide it in the direction
indicated by the arrow to open it.
Load two CR2025 batteries.
After carefully inserting the side of the
battery cover indicated by
the direction indicated by the arrow until
the entire cover sits properly in place.
+ side up.
, slide it in