NordicTrack GRT 950 NTSY39210 User Manual page 7

4. Press the 75mm x 50mm Spacer (48) into the
82mm x 57mm Outer Cap (26). Press the Outer
Cap onto the Hack Squat Leg (2).
Attach the Hack Squat Leg (2) to the two M10 x
67mm Carriage Bolts (33) in the Hack Squat
Base (1) with two M10 Locknuts (32).
Attach the Hack Squat Leg (2) to the Hack Squat
Upright (4) with two M10 x 95mm Bolts (38), two
M10 Washers (36), and two M10 Locknuts (32).
Tighten the M10 Locknuts (32) used in steps 3
and 4.
Arm Assembly
5. Press two 75mm x 50mm Inner Caps (21) into
the Hack Squat Bracket (3). Press four 34mm
Bushings (14) into the Hack Squat Bracket.
Attach the Hack Squat Bumper (16) to the Hack
Squat Bracket (3) with an M4 Washer (37) and an
M4 x 20mm Screw (29).
6. Press two 34mm x 19mm Bushings (13) into the
Hack Squat Upright (4).
Attach the Hack Squat Bracket (3) to the Hack
Squat Upright (4) with a 25mm x 86mm Pivot Rod
(15), two M10 Large Washers (30), and two M10
x 25mm Bolts (31).
7. Press a 75mm x 50mm Inner Cap (21) into the
end of the Hack Squat Frame (5). Press a 50mm
x 40mm Inner Cap (22) into the bottom of the
backrest tube on the Frame. Press two 34mm x
19mm Bushings (13) into the Hack Squat Frame.
Slide two Foam Pads (7) onto the Hack Squat
Frame (5).
Attach the Release Handle (10) to the Hack
Squat Frame (5) with an M6 x 25mm Allen Head
Screw (28).
Slide the Handgrip (8) and the Long Handgrip (9)
onto the indicated handles of the Hack Squat
Frame (5). Press two 25mm Round Inner Caps
(42) into the handles on the Frame.
4
48
2
32
5
29
37
16
21
6
31
7
10
9
42
8
42
7
32
26
4
36
32
32
1
33
14
14
21
3
30 13
13
30
15
31
21
13
5
13
22
7
28
38