Husqvarna 105 Operator's Manual page 50

Hide thumbs Also See for 105:
Table of Contents

Advertisement

The following five options can be selected;
- Never (0%)
- Rarely (approx. 20%)
- Medium (approx. 50%)
- Often (approx. 80%)
- Always (100%)
Select the percentage that corresponds to the size
of the remote area relative to the total working
area. If the remote area is for instance less than
half of the total working area, then Rarely must be
selected. If the remote area is for instance half of
the total working area, Medium must be selected.
Compare with the examples in 7. Garden
examples on page 56.
The default setting is Rarely.
Distance
Enter the distance in metres along the guide wire
from the charging station to the remote area
where the mower begins mowing.
Tips! Use the function to determine how far it is to
the remote area. The distance, stated in metres,
will be shown in the mower display.
Remote start 2
If the working area contains two remote areas, the
guide wire should be installed so that it reaches both
areas. Remote start 1 and Remote start 2 can then
be combined to steer the robotic lawnmower to each
area.
The settings for Proportion and Distance are carried
out in the same way as for Remote start 1.
The default setting is Never.
Take into account that the total figure for Proportion
cannot exceed 100%. For example, if Often is
selected for Remote start 1, then only Never or
Rarely can be selected for Remote start 2.
The guide width is the same for Remote start 1 and
Remote start 2. In this way, it is the narrowest
passage along the guide wire that limits the
maximum guide width.
Test settings
In the Test settings menu, it is possible to test
settings for Remote start 1 and that the selected
guide width works for the garden in question.
50 - English
6. MENU FUNCTIONS
Corridor width
Remote start 1
Remote start 2
Test settings
Drive past wire
3018-095
Test IN
Test OUT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents