Switching Off; Adjusting The Cutting Height - Husqvarna 105 Operator's Manual

4.5 Switching off

Press the STOP button.
1.
2. Set the main switch in position 0.
Always switch the robotic lawnmower off using the
main switch if it requires maintenance or if the robotic
lawnmower must be moved outside the working area.

4.6 Adjusting the cutting height

The cutting height can be varied from MIN (2 cm) to
MAX (5 cm).
During the first week after a new installation, the
cutting height must be set to MAX to avoid damaging
the loop wire. After this, the cutting height can be
lowered one step every week until the desired cutting
height has been reached.
If the grass is long, allow the robotic lawnmower to start
mowing at the MAX cutting height. Once the grass is
shorter, you can gradually lower the cutting height.
To adjust the cutting height:
Press the STOP button to stop the robotic
1.
lawnmower and open the cover.
2. Turn the height adjustment knob to the required
position. The selected position is indicated by the
orange column that can be seen by the knob
through the window.
• Turn anti-clockwise to raise the cutting height.
• Turn clockwise to lower the cutting height.
IMPORTANT INFORMATION
During the first week after a new installation,
the cutting height must be set to MAX to
avoid damaging the loop wire. After this, the
cutting height can be lowered one step every
week until the desired cutting height has
been reached.
40 - English
4. USE
3012-1023
1 2 3 4 5
3012-1005