AEG MRC 4126 P Instruction Manual page 51

Projection clock radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 46
Turning off the Alarm
In order to turn off the alarm, move the function switch (19) to the OFF position.
Automatic Alarm Interval
The automatically set alarm function can be shut off for approximately 9 minutes with the
SNOOZE key (4).
Delayed Shut-Off
The delayed switch-off function can be used when the switch is in the positions AUTO or
OFF.
• When the SLEEP button (17) is pressed the radio is switched off after 59 minutes or
1 hour and 59 minutes. The switch-off time can be adjusted by simultaneously pressing
the SLEEP button and turning the rotating bezel (8).
• This function can be cancelled with the SNOOZE key (4).
Projection
NOTE: Important!
• The display is only visible in a darkened room.
• The maximum distance for the project is ca. 2.7 meters.
With this device, you can project the time onto the wall or the ceiling.
• You can turn the function on and off with the PROJECTION ON/OFF switch (13).
• Take hold of the grip recesses (16) and pull the projector (14) upwards.
• Tilt the projector to the desired position.
• A rotating knob (10) on the underside of the projector can be used to adjust the sharp-
ness of the projected display.
CAUTION:
The projector can only be lowered into the casing when the lens (1) with the help of the
FOCUS regulator (10) has completely been retracted.
Adjusting the time of the projector
Hours:
Press the "T" key (9) and the "H" key (3) at the same time.
Minutes:
Press the "T" key (9) and the "M" key (2) at the same time.
English
51

Advertisement

Table of Contents
loading

Table of Contents