Autoconfiguration (Slaac/Dhcpv6) - D-Link DAP-1330 User Manual

Section 3 - Configuration
IPv6 Device Management Interface
My IPv6 Select Autoconfiguration (SLAAC/DHCPv6) to have the
Connection is: DAP-1330 automatically receive an IPv6 address from the
uplink router.
Obtain IPv6
You can select to obtain IPv6 DNS server information
DNS Servers automatically, or you can select to configure DNS servers
Automatically:
manually by clicking on the radio dial next to the option.
Primary DNS
For manual settings, enter the primary IPv6 DNS server
Server: address.
Secondary DNS For manual settings, enter the secondary IPv6 DNS server
Server:
address. This is optional but will provide backup if the primary
server fails.
D-Link DAP-1330 User Manual

Autoconfiguration (SLAAC/DHCPv6)

34