Settings; Extender Settings - D-Link DAP-1330 User Manual

N300 wi-fi range extender
Hide thumbs Also See for DAP-1330:
Table of Contents

Advertisement

Section 3 - Configuration
This page lets you configure the settings for the DAP-1330's extended wireless network. To access this page, click the Settings drop-
down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
Existing Network
Existing
Select the type of existing network, either Ethernet or Wi-Fi
Network:
you want the DAP-1330 to connect to.
2.4 GHz Extended Wi-Fi
Status:
Enable or disable this network by toggling this slider.
Wi-Fi Name
This is the name of the DAP-1330's extended network. If
(SSID):
using Wi-Fi, the DAP-1330 will rebroadcast the uplink router's
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Security:
Select the type of wireless security you wish to use for the
extended network. Choose None or WPA/WPA2 Personal.
Password:
Enter the password or network key that you wish to use for
the extended network.
Wi-Fi
Select Auto or any channel from 1 to 11 for use with this
Channel:
network.
Channel
Select Auto 20/40 or 20 MHz for the bandwidth you wish
Width:
this network to use.
HT20/40
Enable this option to reduce interference from other wireless
Coexistence:
networks in your area. If the channel width is operating at
40MHz and there is another wireless network's channel over-
lapping and causing interference, the router will automatically
change to 20MHz.
D-Link DAP-1330 User Manual

Settings

Extender Settings

32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents