Signal Strength Indicators - D-Link DAP-1330 User Manual

Section 2 - Installation

Signal Strength Indicators

The Status/WPS LED will turn solid green when the DAP-1330 has connected successfully to an uplink wireless network and is extending
that network. If the Signal Indicator LED has a single amber bar after the connection process has finished, the DAP-1330 has established
a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve the connection
quality, the DAP-1330 should be relocated closer to the source wireless router.
Very Poor Good Best
Poor
D-Link DAP-1330 User Manual 7