Bosch 0 602 207 Original Instructions Manual page 44

High-frequency straight grinder
Hide thumbs Also See for 0 602 207:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 27
OBJ_BUCH-640-001.book Page 44 Thursday, September 17, 2009 12:24 PM
44 | English
Regularly measure the no-load speed of the
grinder spindle. When the measured value is
more than 10 % above or below the speci-
fied no-load speed (see "Technical Data"),
have the machine checked by an authorised
service agent for Bosch power tools. When
the no-load speed is too high, the application
tool can break; when the no-load speed is too
low, the working performance is reduced.
Use only original cables! Before each use,
check the power tool, cable and plug for
possible damage. Cables and plugs may not
be repaired, but must be exchanged in order
to avoid danger.
Have maintenance and repair work per-
formed only by qualified specialists. In this
manner, it can be ensured that the safety of
the power tool is maintained.
Clean the connection sockets, couplers and
plugs of the tool, after it has been disconnected
from the mains supply, using a dry, lint-free
cloth and remove dust and dirt particles.
Clean the gearbox after the first 150 running
hours using a mild solvent. Follow the solvent
manufacturers directions for use and disposal.
Lubricate the gearbox using Bosch gearbox
lube. Repeat the lubrication procedure every
300 hours after the initial gearbox service.
An authorized Bosch after-sales service agent
will carry out this work quickly and reliably.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Accessories
Information about the complete quality acces-
sory program can be found on the Internet at
www.bosch-pt.com and
www.boschproductiontools.com or at your
dealer.
3 609 929 B78 | (17.9.09)
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can
answer your questions concerning possible
applications and adjustment of products and
accessories.
Robert Bosch GmbH is responsible for the deliv-
ery of this product in accordance with the sales
contract within the framework of the legal/
country-specific regulations. For claims with
respect to the product, please contact the fol-
lowing location:
Fax: +49 (711) 7 58 24 36
www.boschproductiontools.com
Disposal
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools
into household waste!
According the European Guideline
2002/96/EC for Waste Electrical
and Electronic Equipment and its
implementation into national
right, power tools that are no longer usable
must be collected separately and disposed of in
an environmentally correct manner.
Subject to change without notice.
Bosch Power Tools

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents