Dvd Mode - Hitachi VC325000 Owner's Manual

DVD Mode

NOTE: DVD related functions are effective on: VC325000 VC405000
Press the SOURCE button on the back panel, or on the remote control, to
switch the unit to DVD mode.
Basic DVD movie playback
• Before placing a disc into the disc compartment, make sure there is no
disc inside. Hold the disc without touching either of its surfaces, position
it with the readable (mirror) side facing towards you, then the disc will
automatically enter into the disc compartment; or you can press the OPEN
button on the remote control to enter the disc into the disc compartment.
• Once the disc is in the disc compartment, the player starts reading the disc
immediately.
• When a menu screen appears on the unit, press the / /
the number buttons, to select the chapter/track number, then press OK to
confirm.
• To stop playing and return to the menu screen, press the TITLE or D.MENU
button on the remote control.
Stopping play
• Press the STOP button to stop playback.
NOTE: When the player is stopped, it records the point on the DVD where
STOP was pressed (RESUME function). Press the
again to resume playback from this point. When the disc is ejected
or STOP is pressed again, the RESUME function will be cleared.
Skipping ahead or backward
Skipping ahead: Duri ng playback, press the
Skipping backward: During playback, press the
37
chapter (DVD) or track (Video CD/CD).
previous chapter (DVD) or track (Video CD/CD).
/ buttons, or
PLAY
button to skip the next
button to skip the
After Sales Support
Telephone:
Email:
info@tempoaustralia.com.au
button
1300 886 649