Download Print this page

Advertisement

( 5 )
Lighting / °C↔°F (3 sec)
The Lighting button serves two purposes:
- To turn the dispenser light on and off.
- To switch the temperature units
between ºC and ºF.
1. Light Function
Touching the Lighting button turns on the
Dispenser LED lamp in continuous mode
so that it stays on continuously.
The button also lights up.
If you want the Dispenser lamp to come on
only when some one uses the dispenser,
press the Lighting button to turn the
continuous mode off.
2. To switch the temperature units
between ºC and ºF.
Touch and hold this button for 3 seconds
to select the temperature display you want.
Each time you press and hold the button,
the ºC and ºF temperature modes alternate
and the ºC or ºF icon lights up, indicating
your selection.
DA68-03029B (EN)-04.indd 28
( 6 )
Ice Maker Off / Control Lock (3 sec)
(11)
The Ice Maker Off button serves two
purposes:
- To turn the Ice maker on and off.
- To turn the Control Lock Function on
and off.
1. Ice Off Function
If you don't want to make more ice, press
the Ice Maker Off button.
The icon lights and the Ice Maker stops
making ice.
If the ice maker function is ON, and the
water Line is not connected, there will be a
water valve noise from the back of the unit.
Press the Ice Maker Off (Control Lock
(3 sec)) button for less than 3 seconds until
the Ice Off Indicator ( 
2. Control Lock Function
Touch and hold this button for 3 seconds
to lock the display and the dispenser
buttons so the buttons cannot be used.
When Control Lock is on, the refrigerator
does not dispense ice or water, even if the
Dispenser Lever is pressed.
The Control Lock icon lights to indicate
you've activated the Control Lock function.
Touch and hold the button 3 seconds to
unlock.
( 7 )
Water
Touch this button to dispense water.
This mode cannot be used with the Ice
Type mode simultaneously.
Water mode shuts off when you touch the
Cubed / Crushed Ice button.
English - 28
 ) illuminates.
2015. 5. 8.
9:32

Advertisement

   Also See for Samsung RF28HDEDTSR

Comments to this Manuals

Symbols: 0
Latest comments: