Language Settings; System Settings - Nokia Mediamaster 9650S Owner's Manual

Change access code
From here you can change the access code from the standard 1234.
DO NOT FORGET IT! Without it you do not have access to any of the functions where the code
is required!
If you forget it, you have to contact an Authorized Nokia Service Center to get help.

Language Settings

From here you can change the language for the menus, main
audio language and alternative audio language.

System Settings

From here you can adjust settings concerning your TV.
TV Screen Format: Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide screen TV.
Output Selection: If the teletext function does not work when
watching channels from an analogue satellite receiver
connected to the Mediamaster, change this setting from " RGB " to " Composite ".
UHF Channel Number: Select this alternative if you have to change the RF channel.
If you change the RF channel number, you must also change it to the same value on the TV. If you
do not, the picture will become black.
RF Modulator Type: If the Mediamaster is connected to the TV by an RF cable, you can select the
RF modulator type. The RF Modulator affects a channel's audio. If you get picture but no sound, the
RF modulator selection might be wrong. Select " UK (PAL I) " if the Mediamaster is used in the UK.
Select " Normal " if it is used elsewhere.
Information Box Timeout (secs): When you switch channels, an information banner will be shown
for a few seconds. You can select for how long the banner will be shown .
Display Volume Indicator: Select whether or not you want the volume bar to appear on the screen
when you change the volume .
Date Setting (dd/mm/yyyy): Used to set the current date, month and year.
Time Setting: Adjust the clock.
GMT Offset: Adjust the time difference in your country.
GB 21