Automatic Channel Search - Nokia Mediamaster 9650S Owner's Manual

Satellite name: From here you can select a name for the configuration.
Switch Type:
There are in principle two kinds of external DiSEqC switches on the market at present. One for
connection of two LNBs. The other one for connection of up to 4 LNBs.
If you have the other switch, defined as DiSEqC, Level 1 or 2 on the market, select " DiSEqC 1, 2, (3
or 4) ", for each LNB connected to respective inputs on this switch.
LNB Type :
Selection is possible for different kinds of LNBs. Select the frequency for the LNB, which is valid for
your combination. You may also enter a value with the numbered buttons on the remote control. The
LNB alternatives are: " Universal " (which is the most common), " 5.150 ", " 9.750 ", " 10.000 ",
" 10.050 ", " 10.600 ", " 10.750 ", " 11.200 ", " 11.475 ".
If you have special LNB type, you should select "User Define" on this menu. And you can enter a new
LNB frequency in the following LNB Frequency menu.
LNB Frequency :
You can enter a special LNB frequency, which is not presented in the LNB Type list as above.
22KHz Tone Switch :
If you have connected to a Dual LNB or two antennas connected to a 22KHz tone switch box, set it to
" Enable " the 22KHz tone switch.
When you have finished the settings in this menu, press the "OK" button to save the parameter.
Press BACK to continue with the channel search set-up
(You can also recall this menu later. From the Main Menu; select "Installation" and then "Antenna
Satellite Configuration").

Automatic Channel Search

Highlight " Automatic Channel Search " using the down arrow
button on the remote control. Mediamaster has pre-
programmed Antenna/Satellite parameters for Astra , HotBird ,
Arabsat , NileSat , PanAmsat 4 , AsiaSat2 , AsiaSat3 ,
TurkSat1B , TurkSat1C , Thor and Other1 to Other7 .
Antenna Alternative : Select the option, " 1 to 16 ", that
corresponds to your antenna system.
Predefined Channel : Each antenna alternative has one or two pre-programmed channel parameters.
Choose a channel from which you want to start the channel search. Normally, each of the pre-
programmed channels gives the same result.
Search Type : Select " Free Channels " in order to search for free channels only.
Select " All Channels " in order to search all channels on the satellite.
GB 13