User Guide for the Nokia Wireless Audio Adapter AD-5B 9310725 Issue 1...
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product AD-5B is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2004 Nokia. All rights reserved.
Pairing the device... 8 Pairing multiple headsets ... 9 Resetting headsets ... 10 Switching the Nokia wireless audio adapter off ... 10 Modes of the light indicator ... 10 Transferring audio signals... 12 Accidental disconnection of the wireless audio adapter ... 13 Optimising the adapter use ...
I n t r o d u c t i o n 1. Introduction The Nokia Wireless Audio Adapter AD-5B enables the use of headsets with Bluetooth technology with Nokia phones that have a Pop-Port™ connector but do not offer integrated Bluetooth functionality.
I n t r o d u c t i o n The Nokia Wireless Audio Adapter sales package includes the adapter and the user’s guide. Note that the Bluetooth passkey, which you need when using the adapter with the headset, is in the card provided in the headset’s sales package.
Note that you should avoid covering the adapter in order to optimise the Bluetooth connection. Note that since the Wireless Audio Adapter is an enhancement to Nokia phone models that do not support Bluetooth wireless technology, there are no menus or user interfaces in the phone itself.
PIN code. You only need to pair each individual headset once. Attach the Nokia Wireless Audio Adapter into the Pop-Port connector of your phone. Note that your phone should be in standby mode, ready to use, and it should not have any characters keyed in.
G e t t i n g s t a r t e d Pairing the device Switch on the headset power before you start to pair your headset with the Nokia Wireless Audio Adapter. Make sure no other headsets or other compatible audio devices are active within a 10 metre range.
The headset whose passkey you enter first becomes the default device for the Wireless Audio Adapter. The Wireless Audio Adapter and the headset are now ready to be used. Note that all audios, including the call alert tones, are now routed to the headset.
For resetting your headset, refer to the user guide for the headset. ■ Switching the Nokia wireless audio adapter off You can also switch the adapter off, if for instance the adapter will not be used for a while.
• Fast green blink (on for 0.2 seconds, off for 0.8 seconds) The adapter is either in Inquiry mode, which means that the adapter is searching for a headset with Bluetooth technology. If a headset is found, the adapter switches itself to Pairing mode.
G e t t i n g s t a r t e d • Alternating red and green blink for 10 seconds (on for 0.5 seconds, off for 0.8 seconds) The adapter is in the Reset mode. When the reset has been successful, the light indicator blinks red.
• You should set the phone’s back light settings in Automatic mode to prevent unnecessary battery consumption. In most Nokia phones, select Automatic at the phone menu under Settings =>Accessory settings=> Handsfree =>Lights. Then select Automatic. • The phone’s internal vibrator works only when the adapter is in Power saving mode.
G e t t i n g s t a r t e d • You should not use the Silent profile in your phone, because then you are not able to hear the ringing tone and you might not notice the call. The Automatic answer does not work when the Silent profile is active.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years. • Keep all accessories out of the reach of small children. •...