Technical Data; Ec Declaration Of Conformity - Black & Decker GTC1843L Manual

ENGLISH

Technical data

Input voltage
No-load speed
Blade length
Blade gap
Blade brake time
Weight (without battery)
Battery
Voltage
Capacity
Type
Charger
Input voltage
Output voltage
Output current
Level of sound pressure according to EN60745:
Sound pressure (L ) 82 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 93 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum)
according to EN 60745:
Vibration emission value (a
uncertainty (K) 1.5 m/s
10
(Original instructions)
GTC1843L H1
Vdc 18
min 1,400
-1
cm 43
mm 12
s < 1.0
kg 3.2
BL1518
Vdc 18
Ah 1.5
Li-Ion
905531** TYPE 1
Vac 230
Vdc 20.5
mA 200
) 1.1 m/s ,
2
h
2

EC declaration of conformity

MACHINERY DIRECTIVE
GTC1843L
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN60745-1, EN60745-2-15
2000/14/EC, Hedge trimmer 1400 min
L (measured sound power) 93 dB(A),
WA
Uncertainty (K) 3 dB(A)
L (guaranteed sound power) 95 dB(A),
WA
Uncertainty (K) 3 dB(A)
These products also comply with directive 2004/108/EC.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of Black &
Decker.
Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
19-10-2010
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective due to
faulty materials, workmanship or lack of conformity, within
24 months from the date of purchase, Black & Decker
guarantees to replace defective parts, repair products
subjected to fair wear and tear or replace such products to
make sure of the minimum inconvenience to the customer
unless:
♦ The product has been used for trade, professional or hire
purposes.
, Annex V
-1