Table of Contents
Advertisement
Recording Audio
Options
( Default value)
[í Monaural]
microphone.
[h Normal]
í
[
Monaural] settings in reach.
[î Wide]
Stereo recording of ambient sound over a more extensive area that adds to the sense of
presence of movies.
84
[ï Zoom]
Stereo recording with the sound linked to the zoom position. The larger the subject
appears on the screen, the louder the sound will be.
Switching the Input (MIC Terminal)
You can switch the input of the MIC terminal depending on whether you are using an external
microphone or an external audio source, such as a digital audio player. This procedure is not
necessary for the optional WM-V1 Wireless Microphone.
Operating modes:
1 Open the [MIC Terminal Input] screen.
>
[FUNC.]
[MENU]
2 Touch [Þ External Audio] or [ß Microphone] and then touch [X].
• If necessary, activate and adjust the audio mix balance (A 85).
Low Cut Filter (MIC Terminal)
When you are recording using a microphone connected to the MIC terminal, you can activate the low
cut filter to reduce the sound of blowing wind, a car's engine and similar ambient sounds.
Operating modes:
1 Open the [MIC Low Cut] screen.
>
[FUNC.]
[MENU]
2 Touch [i On] and then touch [X].
Mono recording that emphasizes sound coming from the front of the camcorder/
Standard stereo recording; a middle point between the [
>
p
>
[MIC Terminal Input]
>
p
>
[MIC Low Cut]
î
Wide] and
Advertisement
Table of Contents
