2. Parts Names
For purposes of this explanation,
all parts of the display are shown.
During actual operation, only the
relevant items will be displayed.
Identiﬁ es the current operation
Shows the operating mode, etc.
* Multi language display is sup-
"Centrally Controlled" indicator
Indicates that operation of the re-
mote controller has been prohibited
by a master controller.
"Timer is Off" indicator
Indicates that the timer is off.
Shows the target temperature.
Set Temperature buttons
Timer Menu button
Mode button (Return button)
Set Time buttons
Timer On/Off button
(Set Day button)
"PLEASE WAIT" message
This message is displayed for approximately 3 minutes when power is supplied to the indoor unit or when the unit is recovering from a power fail-
"NOT AVAILABLE" message
This message is displayed if a button is pressed to operate a function that the indoor unit does not have.
If a single remote controller is used to simultaneously operate multiple indoor units that are different models, this message will not be displayed if
any of the indoor units is equipped with the function.
Shows the current day of the week.
Shows the current time, unless the simple or Auto Off
timer is set.
If the simple or Auto Off timer is set, shows the time re-
TIME SUN MON TUE WED THU FRI SAT
Up/Down Air Direction indi-
shows the direc-
tion of the outcoming airﬂ ow.
"One Hour Only" indicator
Displayed if the airflow is set to
low and downward during COOL
or DRY mode. (Operation varies
according to model.)
The indicator goes off after 1 hour
when the airflow direction also
Room Temperature display
Shows the room temperature. The room
temperature display range is 8 - 39 °C.
The display blinks if the temperature is
less than 8 °C or 39 °C or more.
Indicates the action of the swing louver.
Does not appear if the louver is station-
(Power On indicator)
Indicates that the power is on.
Built-in temperature sensor
Displayed when the remote controller
sensor is used.
Indicates that remote controller but-
tons have been locked.
"Clean The Filter" indicator
Comes on when it is time to clean the
The indicator comes on if the corre-
sponding timer is set.
Fan Speed indicator
Shows the selected fan speed.
Appears when the unit is running in
Fan Speed button
Test Run button
Check button (Clear button)
Airﬂ ow Up/Down button
To return operation
To go to next opera-