Motion Control - Samsung UE75ES9000 User Manual

Your TV can "hear" your voice commands in two ways:
− Using the TV's microphone. (Distant Recognition)
✎ We are recommended using Voice Control function within about
13 ft with your TV. You can check the usable distance by using
Voice Control Environment Test (System → Voice and motion
control → Voice Control → Voice Control Environment Test).
Using the
− VOICE˜ button on your remote. (Close Proximity
Recognition)
✎ When you use the TV's microphone, the words may not be
recognized because of ambient noise. If this occurs, try using the
VOICE˜ button on your remote. The TV will be able to recognize
a voice command more easily.
✎
The VOICE˜ button on your remote is always activated. If you
want to use the TV's microphone, turn on Voice Control (System
→ Voice and motion control → Voice Control).
✎ If a menu option or function is not supported by the Voice
Control function, we suggest trying the Motion control function.
To use the Motion control, raise your hand while opening it
toward the screen, hold it for a moment and then wave it 3–4 time
to the left and right. Motion control starts. If the Motion control
starts, the cursor is displayed at the centre of the screen and the
Motion guide bar size is at the bottom of the screen.
Voice Control
■
Turns the Voice Control function on or off.
✎ The VOICE˜ button on your remote is always activated.
Language
■
Select the recognition language you want to use.
Trigger words
■
You can select the Trigger words that start the Voice Control
function. Alternatively you can turn on your TV using the Trigger
words if Voice Control function is set to On.
If the Trigger words is set to Hi TV, say Hi TV Power On.
If the Trigger words is set to Smart TV, say Smart TV Power On.
Voice command bar size
■
Set the Voice command bar size mode to Minimum or Full.
Minimum displays the least number of words and phrases you
can use.
Full displays all the words and phrases.
Voice Sensitivity
■
Set the sensitivity of Voice recognition.
− Echo Level: Set echo level.
− Recognition responsiveness: Set the responsiveness level
of Voice recognition.
Voice Control Environment Test
■
You can test the noise level on the TV microphone.
− Noise Test: This test checks the noise level of the TV
microphone. Select Next using your remote. The test will start
and should only take a few seconds. Please keep as quiet as
possible during the test.
− Mic & Speaker Test: This test checks the noise level of the
TV microphone and speaker. Select Start using your remote.
The test will start and should only take a few seconds. Please
keep as quiet as possible during the test.
✎ Available only when Speaker Select is set to TV
Speaker.
[UE9000-ZG]BN68-04584A-01L04.indb 15
− Voice Control Test: This test checks the volume level and
clarity of your voice when using Voice Control. Select Start
using your remote. The test will start. Please say a guide
message as loud and clearly as you can to complete this test.
✎ If the test is not completed, select Retest, and then say
a guide message loudly and clearly again.
To use the Voice Control function, follow these steps:
✎
If Voice Control function is set to On, the TV may be turned on
automatically by effect of the ambient environment.
1. Speak the Trigger words that you selected using the microphone
embedded in the TV or press and hold the
your remote. The TV displays the Voice Control Environment
Test.
✎ If you use the Voice Control, the volume will be set to 5
automatically.
2. Speak a word or phrase listed in the Voice Control Environment
Test. If you use the VOICE˜
button.
✎ Pronounce the word or phrase clearly and correctly in the
language you selected in Language.
3. Wait until recognition is complete, and then speak the next
command.
✎ To exit the Voice Control mode, speak a Trigger words or
"Cancel" using the TV's microphone, or press the
button on your remote again.
Using the Voice Text Input Mode
1. Speak "Search All" while in the Voice Control mode.
✎
When you use a QWERTY keypad screen, you can use the
Voice Text Input Mode. Speak the Trigger words that you
selected using the microphone embedded in the TV or press
and hold the VOICE˜
2. Say the word or phrase you wish to search for.
3. The TV executes the spoken function.
✎ Voice Control performance levels will vary based on the
language spoken.

Motion control

Menu → System → Voice and motion control → Motion control
Enable or disable the Motion control function. Lets you control your TV
by moving the TV cursor using specific gestures.
✎
Some applications may not support Motion control.
✎ We are recommended using Motion control function within
about 1.5M ~ 4M with your TV. TV Camera's recognition range
may differ depending on the angle of camera or other conditions.
You can check the recognition range of TV camera by using
Motion control environment test (System → Voice and motion
control → Motion control → Motion control environment test).
Motion control
■
Turns the Motion control function on or off.
Motion guide bar size
■
Set the Motion guide bar size mode between Minimum or Full.
English - 15
button on
VOICE˜
button on your remote, release the
VOICE˜
button on your remote.
2012-09-05 2:04:30