Setup 2: Connect The Power Cord - Sony SDM-S74 Owner's Manual

Connect a computer equipped with a DVI output
connector (digital RGB)
Using the supplied DVI-D video signal cable (digital RGB), connect the
computer to the monitor's DVI-D input connector (digital RGB).
to the computer's DVI output
connector (digital RGB)
Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog RGB),
connect the computer to the monitor's HD 15 input connector (analog
RGB).
Connect the computer according to the following illustrations.
x Connecting to an IBM PC/AT or compatible
computer
to the computer's HD15
output connector
(analog RGB)
IBM PC/AT or
compatible computer
to the DVI-D input
connector
(digital RGB)
DVI-D video signal
cable (digital RGB)
(supplied)
to the HD 15
input connector
(analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)
x Connecting to a Macintosh computer
to the computer's
HD15 output connector
(analog RGB)
Macintosh computer
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.

Setup 2: Connect the power cord

1
Connect the supplied power cord securely to the
monitor's AC IN connector.
2
Connect the other end securely to a power outlet.
SDM-S74
2
to a power outlet
power cord (supplied)
to the HD 15
input connector
(analog RGB)
HD15-HD15 video
signal cable (analog
RGB) (supplied)
1
to AC IN
7
GB