Setting The Mode (Picture/Audio); Automatic Brightness Adjustment Function (Light Sensor); Automatic Picture Quality Adjustment Function (Analog Rgb Signal Only) - Sony SDM-HX75 Owner's Record

Setting the MODE (PICTURE/
AUDIO) mode
(
If you press the button on the right side of the monitor
repeatedly, you can select the MODE from GAME t
MOVIE t PC t AUTO.
When you select "AUTO," the monitor automatically adjusts the
screen brightness according to the brightness of the surroundings
(Automatic brightness adjustment function). For more
information, see "Automatic brightness adjustment function
(light sensor)".
Press the button repeatedly.
The default setting of the MODE is set to "MOVIE". When you
press the button once, "MOVIE" (the default setting) is
displayed, and when you press again, "PC" is displayed.
Each time you press the
follows.
,
Each mode appears on the screen and the MODE is changed. The
menu automatically disappears after about 5 seconds.
Automatic brightness adjustment
function (light sensor)
This monitor is provided with a feature to automatically adjust the
screen brightness according to the brightness of the surroundings.
The brightness of the screen is set to the most appropriate level by
setting the mode to AUTO with the
side of the monitor, or in the PICTURE/AUDIO menu. The
default setting of the brightness of the screen is set to MOVIE.
Also, when you set the mode to AUTO with the
on the right side of the monitor, the adjustment bar is also
displayed. You can adjust the bar with the m/M buttons. Screen
brightness changes according to the level you set.
)
button, the mode changes as
: G A M E
:
M OV I E
:
P C
:
AU TO
5 0
button on the right
button
Automatic picture quality
adjustment function
signal only)
When the monitor receives an input signal, it
automatically adjusts the picture's position and
sharpness (phase/pitch), and ensures that a clear
picture appears on the screen.
The factory preset mode
When the monitor receives an input signal, it automatically
matches the signal to one of the factory preset modes stored in the
monitor's memory to provide a high quality picture at the center
of the screen. If the input signal matches the factory preset mode,
the picture appears on the screen automatically with the
appropriate default adjustments.
If input signals do not match one of the factory
preset modes
When the monitor receives an input signal that does not match one
of the factory preset modes, the automatic picture quality
adjustment function of this monitor is activated to ensure that a
clear picture always appears on the screen (within the following
monitor frequency ranges):
Horizontal frequency: 28–80 kHz
Vertical frequency: 48–75 Hz
Consequently, the first time the monitor receives input signals
that do not match one of the factory preset modes, the monitor
may take a longer time than normal to display the picture on the
screen. This adjustment data is automatically stored in memory so
that next time, the monitor will function in the same way as when
the monitor receives the signals that match one of the factory
preset modes.
If you adjust the phase, pitch, and picture position
manually
For some input signals, the automatic picture quality adjustment
function of this monitor may not completely adjust the picture
position, phase, and pitch. In this case, you can set these
adjustments manually (page 16). If you set these adjustments
manually, they are stored in memory as user modes and
automatically recalled whenever the monitor receives the same
input signals.
20
(analog RGB