Table of Contents
Advertisement
Viewing mode
General Information
The following describes the basic functions of your Mediamaster
while watching terrestrial digital TV .
Some of the functions described here are dependent on the
Service Provider and can only be used if they are included in
the transmitted programme information.
Please note, that during the Channel Search procedure, the
Mediamaster may download a large number of channels. This
may include channels from various Service Providers, also those
to which you do not have access. If you select a programme to
which you do not have access, you will get a message on the
screen.
In addition to the normal functions like switching the Media-
master in/out of standby, changing the volume etc. there are
some other useful functions which will be explained in this part
of the manual.
You can always leave a menu at any time you want, without
affecting any settings, by pressing the back button.
Programme information
Every time you change channels you will receive programme in-
formation for a few seconds. (In the Control folder/User prefer-
ences' menu you can select how long this information will be
shown.)
The information may include:
Current time.
Channel list.
Channel number and name.
Name of the current and next programme.
The start and stop time of the current programme.
A bar, indicating the elapsed time of the current programme.
The start and stop time of the next programme.
Programme information will only be available if it is included
in the transmission. Otherwise a "No information available"
message will be shown.
GB 18
Information
about the
Channel name
current pro-
and number
gramme
Current
Information about
time
the next programme
Name of channel
list
Advertisement
Table of Contents
