Nokia Remote Camera User Manual page 41

The camera now uses the third language in the list when replying to
your text messages.
To set the camera to use the language of the SIM card, send the
following text message to the camera:
18 0
To check the current language, send the following text message to the
camera:
18 ?
By default, the camera uses the language of the SIM card in the
camera.
To check the status of the back-up battery of the camera, send the
following text message to the camera:
20 ?
To restore the pre-configured factory settings to the camera, send
the following text message to the camera:
26 master user passcode
Sending this message clears the user settings and restarts the
camera.
To check the IMEI code and the hardware and software versions of
the camera, send the following text message to the camera:
28 ?
The master user can check how many messages the camera has sent. To
check the number of messages sent, send the following text message
to the camera:
31 ?
To clear the message counter, send the following text message to the
camera:
31 0
Copyright © 2005 Nokia. All rights reserved.
C o n f i g u r e t h e s e t t i n g s
41