When Needed - Nokia X6-00 User Manual

28 Find help
battery power. WLAN on your Nokia device switches off when you are
not trying to connect, not connected to an access point, or not scanning
for available networks. To further reduce battery consumption, you can
specify that your device does not scan, or scans less often, for available
networks in the background.
If you have set
•
connection settings, and there is no packet data coverage (GPRS), the
device periodically tries to establish a packet data connection. To prolong
the operating time of your device, select
When needed.
The Maps application downloads new map information when you move
•
to new areas on the map, which increases the demand on battery power.
You can prevent the automatic download of new maps.
If the signal strength of the cellular network varies much in your area,
•
your device must scan for the available network repeatedly. This
increases the demand on battery power.
If the network mode is set to dual mode in the network settings, the
device searches for the UMTS network. You can set the device to use only
the GSM network. To only use the GSM network, select
Settings and
The backlight of the display increases the demand on battery power. In
•
the display settings, you can change the time-out after which the
backlight is switched off, and adjust the light sensor that observes
lighting conditions and adjusts the display brightness. Select
Settings and
Leaving applications running in the background increases the demand
•
on battery power. To close the applications you do not use, press and
hold the menu key, select
the application with the menu key. Press and hold the menu key, and
select Exit.
Packet data connection
Connectivity
>
Phone Display
>
Options
to When available
Packet data connection
Network Network mode
>
Light time-out
>
Show open
>
© 2010 Nokia. All rights reserved.
in
Menu
>
> GSM.
Menu
or Light sensor.
apps., and navigate to
>
>