De-Register A Handset - Motorola STARTAC S1201H User Manual

On the S12 base:
b
1. Press and hold
registration mode for 90 seconds.
On the S12H handset:
m
1. Press , scroll
d
2. Scroll to REG BASE
3. Enter the base number (1 - 4).
The base numbers that are already in use flash. The display shows SEARCHING....
4. When the handset finds the base signal, the display shows SEARCHING...X, where
indicates the base identification number.
5. The display will ask for the PIN to be entered. Enter the 4 digit PIN code (default =
0000) and press
is automatically assigned an available handset number. Use this number when making
internal calls.
NOTE
If registration is not successful the first time, please repeat the process again in case the
base registration period ran out of time. If the base is not found after a few seconds, the
handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the registration will fail. You must
de-register another handset before you can register a new one.
1.5.2

De-register a handset

Use one handset to de-register another. You cannot de-register the handset that you are
using.
m
1. Press , scroll
d
2. Scroll to DEL HANDSET
3. Enter the 4 digit PIN code (default = 0000) and press
4. Enter the handset number that you want to de-register. You will hear a confirmation
beep and the display will return to the previous menu.
6
for 3 seconds until you hear two beeps. The base will remain in
d
to REGISTER and press
m
and press
m
. You will hear a beep if the registration is successful. The handset
d
to SETUP and press
and press
m
.
.
m
.
m
.
m
.
X
Getting started