1110 Antenna Assembly And Lcd Cover - Lenovo N22 Hardware Maintenance Manual

Lenovo N22

1110 Antenna assembly and LCD cover

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
• "1030 PCI Express Mini Card for wireless LAN" on page 36
• "1040 LCD unit" on page 38
• "1050 System board" on page 40
• "1060 Speakers" on page 42
• "1070 Touch pad module and IO board" on page 43
• "1080 LCD front bezel" on page 45
• "1090 LCD panel, LCD cable, LCD bracket and hinges" on page 47
• "1100 Swivel camera" on page 50
Figure 11. Removal steps of antenna assembly and LCD cover
Note: The integrated camera is stuck on the top center of the LCD cover.
Peel off the adhesive tapes securing the antenna boards, release the cables
from the cable guide, and then remove the antenna assembly in the direction
shown by arrows .
1
a
a
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
51