Notes To Use Wireless - LG SH2 Owner's Manual

PROBLEM
Check the details below and adjust the unit according to them.
y Switch [ON] state of DRC function to [OFF] by using remote controller.
y With the sound bar connected to the TV, change the AUDIO DIGITAL OUT setting
When you feel the
output sound of the
y With the sound bar connected with Player, change the AUDIO DIGITAL OUT setting
unit is low.
y Change Audio DRC setting on Player setup menu to [OFF] state.

NOTES to use wireless

PROBLEM
y Wireless may not operate normally in weak signal area.
This device may have
wireless interference.
y Do not install the device on metal furniture for optimum performance.
y When any part of your body contact the transceiver of the Bluetooth device or
y When there is an obstacle or wall or the device is installed in a secluded spot.
y When there is a device(a wireless LAN, a medical equipment or a microwave) using
Bluetooth device may
malfunction or make
noise in the following
cases. y When to connecting the device to the Bluetooth device, make the distance
y When the device gets too far from the Bluetooth device, the connection is
on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
sound bar.
same frequency, make the distance between the products as far away as possible
each other.
between the products as close as possible each other.
disconnected and also malfunction may occur.
CAUSE & CORRECTION
CAUSE & CORRECTION
Troubleshooting 23
4