How To Fill The Salt Container; Daily Use - Electrolux GA55LIBR User Manual

8.1 The salt container
The salt is used to recharge the resin in
the water softener and to assure good
washing results in the daily use.

How to fill the salt container

1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container
(Only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap of the salt container
clockwise to close the salt container.

9. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
CAUTION!
Only use salt specifically
designed for dishwashers.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion. To
prevent it, after you fill the salt
container, start a programme.
8.2 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
How to fill the rinse aid
dispenser
CAUTION!
Only use rinse aid specifically
designed for dishwashers.
1. Press the release button (D) to open
the lid (C).
2. Fill the dispenser (A) until the rinse aid
reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity (B)
between position 1 (lowest
quantity) and position 4
(highest quantity). Factory
setting: level 4.
Make sure that the appliance is in user
mode.
• If the salt indicator is on, fill the salt
container.
ENGLISH 69
A B
A
+ -
C
D