Settings
WLAN internet access points
Press
, and select
Connection
Destinations
>
and follow the instructions on the screen. Or, open one
of the access point groups, select an access point
marked with
, and select Edit.
Follow the instructions from your WLAN service
provider.
WLAN network name
●
Search for
networks. If you select an existing
network,
WLAN network mode
security mode
access point device.
Network status
●
name is displayed.
WLAN network mode
●
an ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is
not needed. In an ad hoc network, all devices must
use the same
WLAN network
WLAN security mode
●
used: WEP,
802.1x
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network supports
them.
182
Tools
Settings
>
>
New access
>
— Select
Enter manually
and
WLAN
are determined by the settings of its
— Define whether the network
— Select
Ad-hoc
name.
— Select the encryption
(not for ad hoc networks), or
Open
network, no
To enter the settings for the selected security mode,
select
WLAN security
Security settings for WEP
point,
WEP key in use
●
privacy (WEP) key number. You can create up to four
WEP keys. The same settings must be entered on the
WLAN access point device.
Authentication type
●
the authentication type between your device and
or
the WLAN access point device.
WEP key settings
●
of the key),
Hexadecimal), and
the selected format).
Security settings for 802.1x and WPA/WPA2
WPA/WPA2
to create
●
EAP
to use an extensible authentication protocol
(EAP) plug-in, or
Complete the appropriate settings:
EAP plug-in settings
●
your service provider instructs.
Pre-shared key
●
password must be entered on the WLAN access
point device.
settings.
— Select the wired equivalent
— Select
Open
— Enter
WEP encryption
WEP key format (ASCII
WEP key
(the WEP key data in
— Select the means of authentication:
Pre-shared key
to use a password.
— Enter the settings as
— Enter a password. The same
or
Shared
for
(length
or